Müller-ElektronikBasic-Terminal TOP human machine interface
In stock
Basic-Terminal TOP complies with the Isobus-standard ISO 11783. As a universal terminal it is manufacturer-independent and can be used with all machines that comply with the Isobus-standard.
It provides all basic functions that are necessary to operate an Isobus-machine and is equipped with an 320 pixel × 240 pixel TFT color display.
Additionally Basic-Terminal TOP provides precision farming functions like GPS-dependent task management, data exchange with the farm PC via a USB-stick and parallel driving system.
Connections
Basic-Terminal TOP has tree connectors signed as A, B and C.
Connector A (CAN-ISO)
+Vin and -Vin serve the voltage supply. The signals marked with *) correspond to CiA 303-1 allocation. The signals CAN_L and CAN_H are connected internally and are for looping through the CAN network. When TBC_PWR_in is put on the voltage (= +Vin), the terminal can be switched on. When switched on, the terminal delivers the distribution voltage (minus 1,2 V) with maximum 140 mA on TBC_PWR_out for the supply of the terminator networks.
Pin Signal
| 1 | CAN_L |
| 6 | -Vin *) |
| 2 | CAN_L *) |
| 7 | CAN_H *) |
| 3 | TBC_GND*) |
| 8 | TBC_PWR_out |
| 4 | CAN_H |
| 9 | +Vin |
| 5 | TBC_PWR_in |
The connector B is the second CAN interface which can be used e.g. as a J1939 interface. The connector C is a RS-232 interface with 12 V power supply on pin 4 for a GPS receiver and +5 V on pin 9 for Bluetooth.
USB-connector
The USB-connector is USB 1.1 compatibel and can be found at the rear side of the terminal.
Technical data
| Operating voltage: | 8 V to 30 V |
| Operating temperature: | −20 °C to +70 °C (depends on display type) |
| Storage temperature: | −30 °C to +80 °C |
| Weight: | 1,3 kg |
| Measurements (L × B × H): | 220 mm × 210 mm × 95 mm |
| Protection class | IP64 according to DIN 40050/15 |
| EMC | According to ISO 14982 / PREN 55025 Level 4 |
| ESD protection | According to ISO 10605 Level 3 |
| Current consumption | Max. 0,5 A (< 5 W) |
| Microprozessor | 32-bit ARM920T up to 203 MHz |
| RAM | 32 MiB SDRAM |
| Boot-Flash | 32 MiB |
| Programm memory extention | Internal SmartMedia card with 128 MiB |
| Real time clock | Gold cap buffered |
| Operating system | Windows CE |
| USB | 1 USB 1.1 host; 1 USB 1.1 device (optional) |