Sys Tec electronicUSB-CANmodul gateway and interface board
In stock
The PC driver allows for easy plug&play installation and supports simultaneous operation of up to 64 USB-CANmodul devices on the same PC.
The new 32-bit CPU core ensures reliable communication even at high busload, and provides precise message time stamps.
An extremely attractive price-performance ratio and the compact design make the USB-CANmodul devices ideal suited for CAN-bus based development, service and maintenance tasks, as well as use in high-volume serial products.
Key features
- High-speed CAN interface according to ISO 11898-2
- Low-speed CAN interface according to ISO 11898-3 available optionally
- Versions with one, two, eight or 16 CAN-channels available
- Time-stamped CAN messages
- Supports 11-bit and 29-bit identifiers
- Reliable error handling
- Supports "listen-only" mode for use with analyzing tools
- Low power consumption and power supply via USB for table-case devices
- Excellent EMC performance
- Works on USB2.0 hubs
- Quick and easy plug&play installation
- Up to 64 devices can be connected via standard USB hubs for simultaneous use on a single PC
- Digital I/O port (TTL level)
- CE conformity
Software Support
- Configuration tool for managing multiple USB-CANmodul devices
- PCAN View, a simple CAN monitor that allows for reception and transmission of CAN messages
- Programmers API and demo source for Microsoft Visual C++, Delphi, Visual Basic .NET
- Device drivers available for Windows 2000/XP, Linux, LabView
| Features | USB-CANmodul1 | USB-CANmodul2 | USB-CANmodul8 | USB-CANmodul16 |
| Bit-rate (kbps) | 5-1000 | 5-1000 | 5-1000 | 5-1000 |
| CAN interface channels | 1 | 2 | 8 | 161 |
| USB interfaces | 1 | 1 | 1 | 2 |
| USB version | 2.0 & 1.1 12 Mbps |
2.0 & 1.1 12 Mbps |
2.0 & 1.1 12 / 480 Mbps |
2,0 & 1,1 12 / 480 Mbps |
| Temperature range | −40 °C to+85 °C | −40 °C to +85 °C | 0 °C to 55 °C | 0 °C to 55 °C |
| Mixed 11-bit / 29-bit identifiers | Yes | Yes | Yes | Yes |
| Galvanic isolation | Yes5 | Yes5 | Yes | Yes |
| High-speed CAN physical layer2 | Yes | Yes | Yes | Yes |
| Low-speed CAN physical layer3 | No | Yes5 | No | No |
| Single-wire CAN physical layer4 | No | Yes5 | No | No |
| Listen-only mode | Yes | Yes | Yes | Yes |
| Error frame detection | Yes | Yes | Yes | Yes |
| Error counter reading | Yes6 | Yes6 | Yes6 | Yes6 |
| Time stamps | 32-bit | 32-bit | 32-bit | 32-bit |
| Digital I/Os | No | 8 points | 4 × 8 points | 8 × 8 points |
| LED indicators | 3 | 5 | 17 | 33 |
| CAN connector | SUB-D9 | SUB-D9 | SUB-D9 | SUB-D9 |
| Power supply | USB | USB | 85 VAC to 230 VAC | 85 VAC to 230 VAC |
| Typical current consumption | 110 mA | 200 mA | self-powered | self-powered |
| Housing | table-case | table-case | 1HU 19 inch rack mounted or table-case | 1HU 19 inch rack mounted |
| USB cable | 1,8 m | 1,8 m | 1,8 m | 2 × 1,8 m |
1) Two groups of 8 channels
2) ISO 11898-2, supported high-speed CAN transceivers: 82C251, SN65HVD23x, TLE6250G, TJA1050
3) ISO 11898-3, supported low-speed CAN transceivers: TJA1041, TJA1054
4) SAE J2411, supported single-wire CAN transceivers: AU5790
5) Optional
6) "Warning Limit", "Error Passive" and "Bus-off"