CANcom - Direct connection to the worldwide communication systems.

In times of globalisation of the markets the distances to the customer are increasing. This is why there is an increasing need for remote maintenance and diagnosis via telecommunication. This allows reduction of cost for services and shortening of downtimes in case of malfunctions.

Specially for mobile machines this service can only be provided via a radio link. Among radio connections the GSM network (Global System for Mobile communication) is currently one of the best options for telecommunication. GSM offers good availability and can be used internationally. The GSM test and safety mechanisms monitor the correctness of the transmitted data.

CANcom III uses the "global system for mobile communication" (GSM) to exchange data between the CAN network and receiver. Via coupling to an existing CANopen network messages can be directly sent as SMS, e-mail or fax. By means of direct data links (GPRS connection) CAN messages can be transmitted worldwide. Due to its compact and robust design CANcom III can be directly used in the machine.

The software CANcom Basisstation can set up a protocol-transparent connection between the CAN network and any PC software with "CAN capability" (e. g. CANmon or CoDeSys). This is an important condition to fit every mobile machine with a remote maintenance function at low cost.

With CANcom / GPS III the machine is also given the position data of the device connected via CAN. This technology opens up a variety of options for fleet management and location determination of borrowed machines.
The integrated triband GSM modem allows worldwide use.

• Power supply 10 V_DC to 30 V_DC
• GSM 900/1800/1900 standard
• Short Message Service (SMS)
• GPRS support
• Data, e-mails, faxes can be sent
• Data exchange via special network service

• Triband GSM modem with CANopen interface

CANcom III / GPS, CR3104

• Triband GSM modem with CANopen interface
• GPS function