CANit-10/20 CANopen units

The CANopen Units CANit-10 and CANit-20 are general purpose CANopen remote I/O Modules with 8/16 digital inputs and 8/16 digital outputs for 24V_DC. They are especially designed for easily connecting almost all kinds of sensors and actuators to a CANopen-network. There is no necessity of making any program. The CANit-Units have separated power supplies for the system/bus and the I/Os. All I/Os are positive switching and opto-isolated from bus and system supply. The outputs are short-circuit-protected and output overload monitoring is supported. Different bit-rates up to 1 Mbit are possible. The CAN-connectors are at the side and rail mounting allow to align the CAN Units directly, without using a CAN-cable between each other. The CANit-10/20 I/O Modules are available as an open frame PCB, in a front side opened plastics enclosure or in a closed aluminum enclosure. Both enclosures are suitable for mounting on carrier rail.

Canopen Unit CANit-10

• 8 × digital input, 8 × digital output
• Measurements (Aluminum-Enclosure)
  Length × Width × Height:
  116 mm × 76 mm × 80 mm

CANopen Unit CANit-20

• 16 × digital input, 16 × digital output
• Measurements (Alumimum-Enclosure)
  Length × Width × Height:
  161 mm × 76 mm × 80 mm