CAN in Automation (CiA)
headquarters@can.cia.org
www.can-cia.org
CANopen Product Guide 2008
home

Phoenix Contact

www.phoenixcontact.com

NMT
NMT slave
Error control
Node guarding,
Heartbeat producer,
Heartbeat consumer
Boot-up
Yes
Node ID
Hardware switch
No. of PDO
RPDOs
1
TPDOs
1
PDO modes
Event-triggered,
Remotely-requested,
Synchronous (cyclic),
Synchronous (acyclic)
PDO linking
Yes
PDO mapping
Static
No. of SDO
Server
1
Client
No
Emergency message
Emergency producer,
Emergency consumer
Sync
No
Sync producer:
No
Sync counter:
Time stamp
No
Additional functions
None
Supported application layer
CiA 301 V 4.0.2
Supported frameworks
None
Supported profiles
CiA 401: CANopen device profile for generic I/O modules
Certified
No

Headquarters

Phoenix Contact GmbH & Co. KG
Flachmarkstr. 8
DE-32823 Blomberg

Phone: +49-5235-300
Fax: +49-5235-3412-00
Email: info@phoenixcontact.com
URL: www.phoenixcontact.com

FLS CO M12 DI 16 M12 Fieldline CANopen I/O modules

Availability
In stock
  • FLS CO M12 DO 8 M12-2A
  • FLS CO M12 DI 8 M12
  • FLS CO M12 DIO 4/4 M12-2A
  • FLS CO M12 DIO 8/8 M12
  • FLS CO M12 DI 16 M12

Fieldline CANopen devices can be adapted to the bit-rate automatically. The communications address is set using rotary coded switches that are easily accessible from the outside.

CANopen system configuration is made possible with user-friendly "electronic data sheets" (EDS).

The comprehensive diagnostics messages via displays and the bus enable fast and simple trouble-shooting.

The bus is connected either using two Speedcon M12-connections or with T-pieces.

Fieldline stand-alone-devices allow sensors and actuators to be connected via Speedcon M12-plug connectors.

Inputs, outputs and combinations of the two are available functions that allow a flexible and high-power connection of common sensors and actuators.