Wago Kontakttechnik752-327 I/O module
Availability
In stock
In stock
CANopen I/O-module, 10 kbit/s to 1 Mbit/s, electronic module 16 DI/16 DO, digital signals, carrier rail DIN 35, cage clamp connection
The WAGO-I/O-System 752 for CANopen is part of the range of WAGO compact fieldbus nodes for decentralized automation. It has a fixed number of digital inputs (DI) and digital outputs (DO) and transfers the signals via CANopen to a supervisory control. Several variations are available.
A fieldbus node consists of
The WAGO-I/O-System 752 for CANopen is part of the range of WAGO compact fieldbus nodes for decentralized automation. It has a fixed number of digital inputs (DI) and digital outputs (DO) and transfers the signals via CANopen to a supervisory control. Several variations are available.
A fieldbus node consists of
- Base module and
- Pluggable electronic module.
For the informations to base modules look at Item no. 752-827 or 752-828.
The base module allows pre-wiring of the fieldbus and sensor/actuator connections. The electronic module incorporates the electronics and is plugged onto the base module. An electronic module can be replaced without interfering with the field wiring.
The WAGO Cage Clamp® connection is utilized for both the power supply to the electronic module and field terminals for the sensors and actuators.
Power supply terminals can each supply eight digital output circuits, as an example, to establish safety circuits. The power supply to the sensors is protected by a fuse.