The MW0304 remote I/O module is the easiest, most economical and safest way to transfer control signals to/from a PLC from push buttons with activation register.

Two DIP switches groups allow setting the logic address. When the no switch option is used, the address is set by software and remains recorded in the E2PROM memory.

It is possible to select the input behavior so they are sensible even when their associated output is active.

The interface can have an OEM code programmed in the production process and another code called CUSTOM, programmable by the OEM customers, in such a way that this interface can only work in systems using the same codes. Request information on programming tools.

All the inputs/outputs are fully positive and ground short circuit protected, including the bus wires CAN_H and CAN_L.