DescriptionThe CANopen application profile for EMSs specifies the communication interface for all virtual devices that may take part in energy management control application. Such energy management control applications may be implemented in e.g. light electric vehicles, robots, offshore parks, isolated farms, etc. The CANopen application profile for EMSs consists of the following parts: Part 1: General definitions, Part 2: Pre-defined communication parameters and general application objects, Part 3: Pre-defined PDO communication, Part 4: EMS controller, Part 5: Voltage converter unit, Part 6: Battery pack, Part 7: Motor control unit (under development), Part 8: Load monitoring unit (under development), Part 9: HMI unit (under development), Part 10: Security unit (under development), Part 11: Sensor unit (under development), Part 12: Gateway unit (under development), Part 13: Generator unit, Part 14: Load unit. This document represents the part 1 of the CANopen application profile for EMSs. Part 1 provides the general concept of the EMS.

DescriptionThis document represents the part 2 of the CANopen application profile for EMSs. Part 2 provides additional specifications with regard to the pre-defined communication objects as well as the general communication objects.

DescriptionThis document represents the part 3 of the CANopen application profile for EMSs. Part 3 provides the PDO communication and mapping parameters.

DescriptionThis document represents the part 3 of the CANopen application profile for EMSs. Part 3 specifies the application objects provided by the virtual device Energy management system controller (EBC).

DescriptionThis document represents the part 5 of the CANopen application profile for EMSs. Part 5 provides application objects provided by the AC-DC converter. The AC-DC converter may be implemented to realize a battery charger or a charger station.

DescriptionThis document represents the part 6 of the CANopen application profile for EMSs. Part 6 of the document specifies application objects provided by the battery pack.

DescriptionThis document represents the part 13 of the CANopen application profile for EMSs. Part 13 of the document specifies generator units such as a diesel engine, photovoltaic generator, winds turbine, etc. Generators shall be divided into two classes: Controllable and stochastic generator.

DescriptionThis document represents the part 14 of the CANopen application profile for EMSs. Part 14 of the document specifies load units such as lighting, electrical motor, radio, refrigerator, washing machine, etc. Loads shall be divided into three classes: controllable loads, influenceable loads and non-controllable loads.